A Service-oriented Architecture for Ambient-Assisted Living

Ambient-Assisted Living (AAL) is currently an important research and development area, mainly due to the rapidly aging society, the increasing cost of health care, and the growing importance that individuals place on living independently. The general goal of AAL solutions is to apply ambient-assisted intelligence to enable people with specific demands (e.g. handicapped or elderly) to live in their preferred environment longer by tools (i.e. smart objects, mobile and wearable sensors, intelligent devices) being sensitive and responsive to the presence of people and their actions. The research describes the design and development of a novel service-oriented system architecture where different smart objects and sensors are combined to offer ambient-assisted living intelligence to older people. The design stage is driven by a user-centred approach to define an interoperable architecture and human-oriented principles to create usable products and well-accepted services. Such architecture has been realized in the context of an Italian research project funded by the Marche Region and promoted by INRCA (National Institute on Health and Science of Aging) in the framework of smart home for active ageing and ambient assisted living. The result is an interoperable and flexible platform that allows creating user-centred services for independent living

Matching WMAP 3-yrs results with the Cosmological Slingshot Primordial Spectrum

We consider a recently proposed scenario for the generation of primordial cosmological perturbations, the so called Cosmological Slingshot scenario. We firstly obtain a general expression for the Slingshot primordial power spectrum which extends previous results by including a blue pre-bounce residual contribution at large scales. Starting from this expression we numerically compute the CMB temperature and polarization power spectra arising from the Slingshot scenario and show that they excellently match the standard WMAP 3-years best-fit results. In particular, if the residual blue spectrum is far above the largest WMAP observed scale, the Slingshot primordial spectrum fits the data well by only fixing its amplitude and spectral index at the pivot scale k_p=10^{-3}h x Mpc^{-1}. We finally show that all possible distinctive Slingshot signatures in the CMB power spectra are confined to very low multipoles and thus very hard to detect due to large cosmic variance dominated error bars at these scales.Comment: 9 pages, 4 figures; v3 clarifications added, version accepted for publication in Gen. Rel. Grav. 200

Technical-business design methodology for PSS

Concurrent Design (CD) is a systematic approach to integrated product design that emphasizes the response to customer expectations and the combination of creativity and engineering. Such a concept represents also the basis of Product- Service System (PSS), which represents a valid way for companies to add value to their products, create new value propositions, and easily improve their solution portfolio. Indeed, the fulfilling of the customer needs is fundamental for creating successful industrial PSSs (IPSSs), which aim at combining products and services into a marketable solution. However, the integration of technical and business aspects is crucial to succeed. In this context, this paper proposes an integrated methodology for PSS addressing both technical and business aspects; it adopts a QFD-based approach to structure PSS information along the different process stages, considering four main domains: customer, functional, assets and network. It allows technical feasibility to be carried out and business framework to be defined at the same time to have a robust design concept and a reliable business model from the early design stages. The method is based on the direct involvement of the customer voice according to the CD paradigm. The proposed method also allows to define earlier the network of stakeholders and to dynamically reconfigure the network itself along the process, promoting the creation of the lean enterprise

A Multi-objective Design Approach to Include Material, Manufacturing and Assembly Costs in the Early Design Phase

AbstractConceptual design is a crucial activity in the product development process. The design freedom must consider a trade-off analysis among several aspects such as assembly, manufacturing, and costs. The goal of this approach is to define a multi-objective design approach for the determination of feasible design options. The approach is grounded on the concept of functional basis for the analysis of product modules and the theory of Multi Criteria Decision Making (MCDM) approach for the assessment of the best design option. A complex product (tool-holder carousel of a machine tool) is used as a case study to validate the approach

A critical review of symbiosis approaches in the context of Industry 4.0☆

Abstract The implementation of symbiosis approaches is recognized as an effective industrial strategy towards the optimization of resource exploitation and the improvement of collaboration in the context of Industry 4.0. An industrial system can be considered as a complex environment in which material, energy, machine, and human resources should cooperate towards the improvement of efficiency and the creation of value. According to this vision, the paper presents a detailed literature review about the existing symbiosis approaches: (i) industrial symbiosis models, which mainly aim at the sharing of resources among different companies, and (ii) human symbiosis, which focuses on how to effectively strengthen the synergy among humans and machines. Strengths, weaknesses and correlations among the most common symbiosis approaches are analysed and classified. Finally, the existing symbiosis models are related with the pillars of the Industry 4.0 paradigm, in order to understand what should be the future directions of research in the context of collaborative manufacturing

Teaching eco-design by using LCA analysis of company's product portfolio: the case study of an Italian manufacturing firm

Abstract Eco-design is a design paradigm aiming to the development of sustainable products. Life Cycle Assessment (LCA) is considered an eco-design tool able to assess the product environmental performances through a life cycle perspective. However, LCA shows some limitations in industry's daily practice and cannot be considered a standard for implementing eco-design. The paper aims to describe the implementation of a novel eco-design teaching approach involving company's employees from different technical departments. LCA analysis of company's product portfolio allowed to create a specific eco-knowledge, used to train designers and engineers on this subject for the implementation of eco-design actions during the development of new products (espresso coffee machine). Results highlighted relevant learning outcomes and significant improvements in terms of environmental sustainability of a new product design

a 4m approach for a comprehensive analysis and improvement of manual assembly lines

Abstract Design for Assembly (DfA) is a well-known technique that supports in the reduction of manufacturing costs. Traditional DfA methods are generally focused on the product design lacking of a holistic view. The proposed 4 M approach takes into account all the most important aspects involved in the manual assembly: Method, Machine, Man and Material. The final goal is to provide a means for the concurrent improvement of the product design, the workstation ergonomics, and the assembly tasks. Results obtained with the electric spindle motor case study confirmed the usefulness of the approach in optimizing the manual assembly

analytical cost estimation model in high pressure die casting

Abstract The present paper aims at the definition of an analytical model for the cost estimation of the High Pressure Die Casting (HPDC) process. The model is based on two main pillars: (i) knowledge formalization and (ii) cost estimation algorithms. The novelty of this approach is the link between the analytical model (algorithms) and the geometrical features of the product under development. The relationship between geometrical features and cost items gives an accurate result in terms of cost breakdown, supporting designers for the application of Design-to-Cost rules in HPDC sector

Environmental Analysis of Different End of Life Scenarios of Tires Textile Fibers

Abstract End-of-Life Tires (ELT) are one of the main source of waste in End of Life Vehicles (ELVs). Textile fibers represent about 10% in weight of the ELT and every year, in Europe, about 320,000 tons of dirty fibrous material must be disposed as special waste. Studies show that the fibrous material can be used in second life applications, reducing the environmental impacts of tires disposal, but none of these researches quantitatively evaluate the achievable benefits. This study presents a comparative evaluation of the environmental impacts of the tires considering different scenarios for the end of life of the textile fibers material

a tco model for supporting the configuration of industrial plants

Abstract In the current industrial context, where processes are extremely flexible to meet the changes of the market demand, the traditional strategies for managing the design and investment of industrial assets are too restrictive. Indeed, such strategies just consider the procurement price of an asset rather than its lifecycle cost. In this framework, the paper proposes a Total Cost of Ownership (TCO) model that can be adopted in B2B context for establishing the best asset configuration and procurement strategy by considering its CAPEX and OPEX. Such a TCO model has been implemented into an Enterprise Application Software for supporting the TCO evaluation. The presented model and software tool have been applied within an Italian food company for supporting the assets investment management